Know that if there are no gears, then the motorcycle will not be able to run. Gears and chains are important components on a motorcycle. Usually, if these components do not function, something will happen. Therefore, as a motorcycle user, you need to know the characteristics of worn motorcycle gears and problematic chains.
Causes of Worn Motorcycle Gears
In general, this gear component has a significant function, namely to transmit the rotation of power from the transmission to the rear wheels. If the component is worn out or no longer usable, it can certainly interfere with driving comfort. Therefore, it is necessary to know the causes of worn motorbike gears so that users can know and handle them immediately. Here are the causes.
- Poor Gear Quality,
- Excessive Use,
- Not Enough Lubricant,
- Incorrect Chain Tension,
- Lack of Maintenance,
- Gear or Chain Problems,
- Inappropriate Spare Parts.
Characteristics and How to Fix Them
The gear and chain components themselves have become a single unit in the motor vehicle system. Of all the mechanical components, this motorcycle gear is susceptible to damage due to continuous use.
The wear itself can cause the performance of the vehicle to decrease. The most likely is total damage if not immediately handled by a team of experts.
Sourced from the TikTok video @sobatmotorku.id, signs of a worn gear seat are a noisy sound when driving, the chain is easily loose and difficult to adjust unless by cutting the chain. Furthermore, the rear gear eye is sharp and the chain is no longer precise with the gear.
The following are details that are proof that the motorcycle gear is worn.
Rusty
The appearance of rust is a sign that the gear is worn. It is a good idea as a motorcycle owner to pay close attention to signs of corrosion or rust on the gear. Especially when the vehicle is often exposed to water or high temperatures. For information, weather conditions also affect gear wear.
Sharp Gear Teeth
This is one of the physical characteristics of worn motorbike gears that users can see directly. Sharp gear teeth on both sides are evidence that the gear is worn. In addition, because it has been eaten away when the gear rubs against the chain component. While the new gear has quite thick teeth. In general, gears begin to thin out after about 2-3 years of use, with the note that the rider uses his motorbike every day.
Abnormal Sounds
The emergence of noisy or abnormal sounds is also a sign that the gear is worn. Components that are still in good condition will work with a smooth sound and tend to be stable. While worn gears will make noisy and abnormal sounds.
The sound can be a squeak. The origin of the sound occurs due to friction between uneven gear components. When you hear this sound, it’s a good idea to check it immediately because it’s likely that the motorcycle gear is starting to have problems.
There are Vibrations
In addition to the appearance of abnormal sounds, worn motorcycle gears will usually cause excessive vibrations. This is because when the gear teeth are worn they will not be able to work perfectly and optimally, so that it can create an imbalance in the system, and cause abnormal vibrations.
Excessive vibrations can also worsen damage to other motorcycle components. Therefore, it is very important to handle it immediately so as not to worsen the problems in the vehicle.
Excessive Heat
While excessive heat is also a characteristic of worn gears. This occurs because of the much higher friction between gear components. Friction can cause an increase in motor temperature, which can cause the engine to overheat.
If the user continues to let this happen for a long time, the heat can damage the internal components of the motorcycle, such as electrical cables and others which can end up being permanent damage.
Decreased Performance
A worn motorcycle gear will lose engine performance. Vehicle performance also decreases, and creates unstable speeds. In some cases, the speed of a motor vehicle can be unstable and tends to go up and down for no apparent reason. This could be a sign that the gear is worn out.
Another cause is also due to roughness on the surface of the gear teeth which can affect the transfer of power between vehicle components.
For information, corrosion and rust can also reduce the strength and durability of gears or chains. Thus, it can result in failure or damage that is much more intense.
Components on a motorbike often have problems without the user realizing it. In fact, some people don’t know the reason. With an explanation of the causes of worn out motorcycle gears, it is hoped that vehicles can get better care to avoid unwanted things from happening. Do the above methods to minimize damage.
